Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Rhawnhurst?
Panel replacement in Rhawnhurst typically costs $250 – $500 for a single damaged panel on a standard residential door. That covers removal of the bent or dented section, a matching replacement panel, and re-hanging the hinges, rollers and hardware so the door runs level again. A door with several damaged sections, or one on an older model where the panel profile is no longer made, runs higher; the written estimate you get before any work begins always sets the final price.
We’re a garage door specialist, not a general handyman crew, so our focus is panel replacement on the brands you already own: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor. Our technicians have up to 14 years of experience, and they know the panel profiles and hinge spacing on these lines before they arrive. Call (877) 492-3530 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Panel Replacement Cost Breakdown (2026)
Here’s what each part of a panel replacement job looks like in estimated 2026 dollars for the Rhawnhurst market. These are typical ranges, not quotes. The written estimate is what you pay.
| Item | Typical estimated range | What it covers |
|---|---|---|
| Single panel replacement (standard door) | $250 – $500 | One matched panel supplied and fitted, hardware reset |
| Two or more panels | About $250 – $500 per panel | Multiple section swap-out in one visit |
| Full section replacement with track adjustment | $250 – $500 plus track realignment ($120 – $240) | Panel replacement where the door is out of alignment |
| Roller replacement during the job | $110 – $220 | Worn or seized rollers swapped while the door is apart |
| Cable repair if a worn cable is found | $130 – $250 | Safety-critical cable work handled in-house |
| Spring repair if a spring fails mid-job | $180 – $340 per spring | Torsion or extension spring work; matched pairs cost about twice that |
| New door installation (if panels are beyond saving) | $700 – $2200 | Full door replacement |
| Garage door repair (general) | $150 – $600 | Broader repair basket across the system |
What drives the number up or down: the number of panels, the panel pattern (a flat steel panel is cheaper than a raised-panel or carriage-style profile), whether the paint color still matches a current stock line, and how far the door has shifted out of alignment. When a panel replacement uncovers a failing spring, a worn cable or seized rollers, fixing it now in the same visit usually costs less than a second trip. That’s the practical reason we quote the whole job up front rather than a per-panel figure.
For a sense of scope, all our repair work sits in a broad garage door repair range of $150 – $600. Panel replacement typically lands near the middle of that band, while a full new door is a separate project. If you’d rather start at the front door, our Garage Door Repair Rhawnhurst page walks through repair work generally.
What Affects Panel Replacement Pricing in Rhawnhurst
Rhawnhurst is a settled row-and-single-home neighborhood in Northeast Philadelphia, and the housing stock shapes what a panel job actually looks like. Most doors here are older single-car or standard double-car models, and many have been repainted or painted over at least once. That matters for cost, because the panel has to match the rest of the door, not just fit the opening.
- Panel count and pattern. One panel on a flat steel door is the low end of the $250 – $500 range. Raised-panel or carriage-style profiles cost more, and each additional panel adds roughly the same again.
- Matching the existing finish. If your door is a current stock profile in a standard color, the panel slides in clean. If the door was painted years ago, the new panel won’t match the faded color exactly, and we’ll talk through whether painting the full door is the better move.
- Door age and brand. Some older models have panel profiles that are discontinued. On those, a matched replacement isn’t available, and a partial or full door replacement is the realistic path. We service Clopay, Amarr, Wayne Dalton, Craftsman, Raynor, LiftMaster, Chamberlain and Genie, so we can tell you quickly which category your door falls into.
- Alignment and hidden damage. A bent panel often comes with a bent track or a worn roller behind it. If the door is out of alignment, track realignment ($120 – $240) or roller replacement ($110 – $220) gets added to the job so the new panel sits straight.
- Older homes and wood frames. Many Rhawnhurst homes have wood surrounding the door opening. If the frame has absorbed moisture and swelled, the new panel may not seat cleanly until the opening is squared up.
- Openers and hardware. If the opener strainer or brackets are bent from the same impact that damaged the panel, correcting those is a small addition to the job, not a separate project.
Weather here is a real factor over the years, not a single event. Philadelphia summers get hot and humid, and winters swing between freezing and thawing. Steel panels expand and contract through those cycles, and older paint can crack and let moisture into the steel. A door that gets hit often rusts at the impact point, and a small dent can turn into a slow corrosion problem over a few seasons. Hail isn’t a common visitor here, so most panel damage we see is impact from a backed-in car, a bike, a stray basketball or a shifting door that caught the frame. If you’re noticing a dent rusting, replacing the panel while the rest of the door is still sound is cheaper than waiting for the whole door to go.
How to Save on Panel Replacement
There’s no trick to lowering a panel bill, but there are ways to keep it at the sensible end of the $250 – $500 range.
- Do one visit, not three. If a roller is seized or a cable is fraying, let us fix it while the door is already disassembled. Paired work in one visit costs less than booking each job separately.
- Replace only what’s damaged. If one panel is dented and the rest are sound, a single-panel replacement is the right call. Replacing a whole door when one section is bent pushes the bill toward $700 – $2200 for no reason.
- Match the panel, not the paint. If your door’s color is close but not an exact match, factoring a quick touch-up or repaint into the estimate is often cheaper than hunting down a discontinued color.
- Get the estimate in writing before work starts. A written estimate with the panel count, profile and any hardware add-ons means no surprises. That’s how we work, and it’s the single most useful habit for any homeowner.
- Ask about spring condition while we’re there. If your current springs are near the end of their life, knowing that now lets you plan. Springs are a safety issue, not just a repair, and we handle them in-house rather than referring them out.
Estimates are free. Call (877) 492-3530 and we’ll walk through your door, your panel profile and your options. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Where Panel Replacement Fits in the Whole Job
Panel replacement sits in the middle of the garage door service spectrum. It’s more than a repair call on a single spring, but less than a new door. Our dedicated garage door focus means every technician works only on door and opener systems, never split across plumbing, HVAC or general contracting. That focus is what makes a panel match quick to sort out instead of a scavenger hunt.
The full-cycle capability matters here too. If a panel replacement reveals the rest of the door is beyond saving, you don’t get handed off to another company. We go from repair through new installation, so the same job ticket carries to completion. On the opener side, we service LiftMaster, Chamberlain, Genie, Craftsman and the other brands on our list. Opener repair runs $120 – $320, and opener installation runs $250 – $550 if you’re upgrading while the door is open. If you’re planning a replacement, our panel replacement guide covers the process in more detail. And because we’re specialists, we treat a stuck-open or stuck-closed door as an emergency, so a failed panel that leaves the door jammed gets triaged the same day.
FAQs – Panel Replacement Cost
How much does panel replacement cost in Rhawnhurst?
Panel replacement in Rhawnhurst typically costs $250 – $500 for a single standard panel, installed. Multiple panels or a premium profile push toward the top of that range. Call (877) 492-3530 for a free estimate and an exact figure for your door.
Can I replace just one panel instead of the whole door?
Yes, and that’s usually the smart move. One damaged panel on an otherwise sound door is a $250 – $500 job rather than a $700 – $2200 full replacement. The exception is a discontinued panel profile, where a match isn’t available. Call us and we’ll tell you which situation you’re in.
Why does the same job cost more or less from one Rhawnhurst home to another?
The typical range shifts with panel count, panel profile, and whether alignment or hardware work gets added. A single flat panel on a level door lands near $250; a raised-panel profile on a door that also needs track realignment ($120 – $240) lands closer to $500. A written estimate sets the final price.
Is it cheaper to repair the panel or replace the door?
Repair is cheaper in most cases. A $250 – $500 panel replacement beats a $700 – $2200 new door whenever the rest of the structure is sound. If the door frame is warped, the springs are near the end of their life, and the panels are rusting through, replacement is the better long-term spend. We’ll give you both numbers so you can decide.
Can you come out today for a damaged panel?
Often, yes. Same-day service is a real option, and a door stuck open or off its tracks is treated as an emergency. Call (877) 492-3530. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. The estimate is free.
Is panel replacement something I can do myself?
We wouldn’t recommend it. A garage door is held under high tension by its springs and cables, and those are dangerous even when the door looks stationary. Panel work means releasing and resetting hardware under load. Our technicians have up to 14 years of experience handling that safely. Call (877) 492-3530 and let a trained professional take it.
What to Have Ready Before You Call
A few details speed up the estimate process. Jot down the door brand if you can find it (the sticker is usually on the inside of the door or on the opener box), the approximate width of the door, how many panels are damaged, and whether the door is opening and closing normally. That’s enough for us to give you a realistic range over the phone before a technician walks up your driveway. Our technicians have up to 14 years of experience, and they know the major brands on sight. Whether your hardware says Clopay, Amarr, Wayne Dalton, Craftsman, Raynor, LiftMaster, Chamberlain or Genie, the panel replacement plan is built around your door, not a generic template.
The estimate is free and the price is set per job. Nothing gets added on the day without your okay. Call (877) 492-3530. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Stuck open, stuck closed, or just a dent that won’t quit, that’s the call to make.
Pricing reflects the Rhawnhurst market as of 2026. Garage Door Repair Rhawnhurst offers free estimates – call (877) 492-3530.
Written by the team at Garage Door Repair Rhawnhurst.
What Our Customers Say
"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
- Renee Sutton"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Erin Sullivan"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Emily Hayes